¶
Application Center
¶
VisionFive 2
¶
Python Application Notes
StarFive provides the following application guides in Python.
Using VisionFive 2 IIC to Read SHTC3 Data
Using VisionFive 2 UART to Read GPS Data
Using VisionFive 2 GPIO to Make a Buzzer Beep
Using VisionFive 2 GPIO to Make an LED Blink
Using an LED Dot Matrix with VisionFive 2
Using VisionFive 2 to Make an LED Blink at the PWM Frequency
Using VisionFive 2 SPI to Support LCD Display
Using VisionFive 2 GPIO to Detect Button
Using a Button to Control an LED Dot Matrix on VisionFive 2
Using VisionFive 2 GPIO to Detect Button in a Specified Time
Using VisionFive 2 GPIO to Verify PUD Function
Run RPi Demo on VisionFive 2 to Make an LED Blink
Run RPi Demo on VisionFive 2 to make LED Blink at the PWM Frequency
¶
Object Detection Application Notes
Using VisionFive 2 to Detect Image Defects
Using VisionFive 2 to Detect Image Edge
Using VisionFive 2 to Recognize General Objects
Using VisionFive 2 to Detect and Decode QR Codes
Using VisionFive 2 to Control 3D-Printed Flowers
¶
Dev Course
Demo 5 - Using Photosensitive Sensor on VisionFive 2
Demo 6 - Using Photosensitive Sensor on VisionFive 2 to Read Light Intensity Data
Demo 7 - The Use of Heart Rate Sensor on VisionFive 2
Demo 8 - Using Air Pressure Sensor to Measure Height on VisionFive 2
Demo 9 - Using Flame Sensor to Detect Flame on VisionFive 2
Demo 10 - Using Smoke Sensor to Detect Alcohol Leakage on VisionFive 2
Demo 11 - Using Fire Alarm Device on VisionFive 2
Demo 12 - Using Line Tracker on VisionFive 2
Demo 13 - Using Temperature Sensor to Control Fan Speed on VisionFive 2
Demo 14 - Using the Colorful Light Ring on VisionFive 2
Demo 15 - Implementing Robot Servo Control on VisionFive 2
¶
Other Application Articles
Compile and Install OpenWrt on VisionFive 2